| Continuous Current
|| 100 Amp |
| Burst Current
|| 120 Amp @ 10 sec|
| LiPo Cells
|| 5 - 12|
| NiMH Cells
|| 15 - 36|
| Size (LxWxH)
|| 88x55x18 mm |
|| 112 g|
|| No |
|| ESC Manual HV|
1.1 Output: Continuous 100A, Burst 120A up to 10 seconds.
1.2 Input Voltage: 5-12 cells lithium battery or 15-36 cells NiCd/NiMH battery.
1.3 BEC: None.
1.4 Refresh rate of the throttle signal: 50Hz to 432Hz.
1.5 Control Signal Transmission: Optical / electrical coupled system.
1.6 Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for
12 poles BLM. (BLM = BrushLess Motor)
1.7 Size: 88mm (L) * 55mm (W) * 18mm (H).
1.8 Weight: 112g.
2.1 Safety arming feature: Regardless the throttle stick position, the motor will not spin after battery connected.
2.2 Anti-spark circuit eliminates sparks when the battery pack is connecting with the ESC.
2.3 Throttle calibration funtion: Throttle range can be calibrated to be compatible with different transmitters.
2.4 User programmable.
2.5 Compatible with Lipo battery and NiCd/NiMH battery.
2.6 Internal timing can be changed to be suitable for different brushless motors.
2.7 Full protection: Low voltage cutoff protection / Over-heat protection / Throttle signal loss protection.
2.8 The throttle signal is transfered through optical / electrical coupled system to avoid electromagnetic interference.
2.9 Multiple program methods supported: transmitter stick, LED Program Card. Very easy to program the ESC at home or at the flying field.